SDK's thermoelectric elements and modules have achieved high conversion efficiency in the medium operational temperature range of 300-600C. Based on the results of successful continuous operation for about four months (3,000 hours), the two firms will begin testing this month SDK's newly developed thermoelectric modules with longer durability.
About thermoelectric power generation
Heat energy is directly converted into electricity based on electric potential difference caused by temperature differences at both sides of thermoelectric elements. It is estimated that around 70% of total energy provided in Japan is wasted, being emitted into the atmosphere. Thermoelectric power generation will enable utilization of this vast untapped energy from different sources, including incinerators, automobiles, ships and industrial equipment. It will also help reduce CO2 emissions.
Development of thermoelectric power generation has so far focused on the low temperature range of 100-300C involving hot springs and diesel engines. SDK aims to commercialize thermoelectric power generation in the medium temperature range (300-600C) with higher output in view of the presence of several thousands of waste incinerators in Japan.
Outline of experiments
(1) Development of SDK's thermoelectric power generation modules
Modules consist of thermoelectric elements arranged in the form of plates or cylinders. SDK has been developing thermoelectric elements based on its expertise in sintered rare earth magnetic alloys and powdered alloys, using rare earths, iron, cobalt and antimony. SDK's latest thermoelectric elements are cost-competitive as they are made using rare earths with little restrictions in supply. In the production of modules, SDK uses its bonding and heat design technologies acquired as a result of its business in design and production of heat exchangers for automotive air-conditioners.
To achieve high power output, it is necessary to ensure that materials for thermoelectric elements have high electrical conductivity and low heat conductivity. SDK has developed high-performance thermoelectric elements by applying its advanced quick-cooling technology for the production of sintered magnetic alloys*.
Specifically, materials for thermoelectric elements are quickly cooled and solidified, for efficient formation of filled skutterudites* (a structure having the property as a semiconductor), and then sintered.
Furthermore, SDK's proprietary bonding technology is used in the production of modules, enabling high output at around 500C. In laboratory tests where temperature at hot side is 600C and temperature at cold side is 50C, SDK has achieved a conversion efficiency* of 6.2% and power density* of 2.4 W/cm2. SDK has also achieved a maximum output of 21.6 W, which represents the highest level in the world for thermoelectric modules.
(2) Installation by Plantec of thermoelectric modules in incinerator
Plantec, which has built more than 100 incinerators at home and abroad, is supporting the experiments, installing SDK's thermoelectric modules in a waste incinerator and taking steps to improve the levels of durability and maintenance. Through these development efforts, SDK and Plantec aim to provide a new heat recovery technology that can be used at many incineration facilities throughout Japan.
The two companies will continue developing thermoelectric power generation modules with higher output and durability, thereby contributing to reductions in CO2 emissions and conservation of resources.
(1) SDK's advanced quick-cooling technology for the production of sintered magnetic alloys: A process for high-speed quenching of molten rare-earth raw materials on a water-cooling roll
(2) Filled skutterudites: Cubic structure of crystals
(3) Thermoelectric conversion efficiency: Percentage of heat energy that has been converted into electrical energy
(4) Power density: Battery's power (in W) per unit area
About Showa Denko
Showa Denko K.K. ('SDK'; TSE: 4004, US: SHWDF) is a major manufacturer and marketer of chemical products serving a wide range of fields ranging from heavy industry to the electronic and computer industries. SDK makes petrochemicals (ethylene, propylene), aluminum products (ingots, rods), electronic equipment (hard disks for computers) and inorganic materials (ceramics, carbons). The company has overseas operations and a joint venture with Netherlands-based Montell and Nippon Petrochemicals to make and market polypropylenes. In March 2001, SDK merged with Showa Denko Aluminum Corporation to strengthen the high-value-added fabricated aluminum products operations, and is today developing next-generation optical communications-use wafers. For more information, please visit www.sdk.co.jp .
Source: Showa Denko
Contact:
SDK IR & PR Office Phone: +81-3-5470-3235 PLANTEC Sales Department Phone: +81-6-6448-0141
Copyright 2010 JCN Newswire. All rights reserved. www.japancorp.net
© 2010 JCN Newswire
