Dallas (pts018/18.02.2015/11:45) - * Features 228-Watt Design with Ultra-Wide
Input Voltage Range of 18-75 Volts
* Space-Efficient, Quarter-Brick Footprint Enables Efficiencies up to 93 Percent
GE's Critical Power business (NYSE: GE) has expanded its Hammerhead series of
DC-DC modules with its new 228-watt (W) quarter-brick QHHD019A0B isolated DC-DC
converters. The low-height modules provide a single, precisely regulated output
voltage over an ultra-wide input voltage range of 18-75 volts DC. The new DC-DC
converters exhibit GE's vast heritage of reliability and quality while
integrating the latest in technology, component and process standardization.
These cost-effective and energy- and space-efficient DC-DC converters enable
input power flexibility for board designers while providing a common building
block that can support multiple sockets. In terms of output voltage, GE's new
Hammerhead converters provide a nominal 12-volt output voltage that is rated for
19 amps output current. The new modules achieve typical full-load efficiencies
of greater than 93 percent at input voltages of 24 volts and 48 volts.
Standard features of GE's QHHD019A0B DC-DC converters include remote on/off,
remote sense, output-voltage adjustment and over-voltage, over-current and
over-temperature protection. In addition, an optional heat plate is available,
which allows for an external, standard, quarter-brick heat sink
attachment-enabling designers to achieve higher output currents in
high-temperature applications.
With the addition of the new 228-W QHHD DC-DC converters to its extensive family
of Hammerhead products-which include EHHD, KHHD and SHHD modules-GE is able to
provide board designers with a wide range of offerings-from 15-W in a
1-by-1-inch module to 228-W in a DOSA-standard, quarter brick unit. This
versatility allows GE to provide board designers with the technology they need
to meet their unique design challenges.
Key Features and Benefits of the GE's QHHD019A0B Isolated DC-DC Converters:
* Ultra-wide input voltage range of 18-75 volts.
* High power density at 228-W.
* Nominal output voltage of 12 volts at 19-amp output currents.
* Robust 2,250-volt isolation.
* Typical full-load efficiencies of greater than 93 percent at input voltages of
24 volts and 48 volts.
GE's QHHD019A0B DC-DC converters can be used as a traditional DC-DC module,
powering devices such as hard drives, fans and other applications requiring 12
volts of power. The modules also feature 2,250-volt isolation, making them ideal
for use in power over Ethernet (PoE) applications. Other key applications for
GE's new Hammerhead-series DC-DC converters include hybrid power architectures,
wireless networks, enterprise networks (including PoE) and industrial equipment.
GE will be showcasing its new QHHD019A0B DC-DC converters at embedded world 2015
(booth # 5-120), which is taking place Feb. 24-26 in Nuremberg, Germany.
Availability and Pricing:
GE's QHHD019A0B isolated DC-DC converters are now available in volume
quantities. Pricing begins at $31.10 per module at original equipment
manufacturer production volumes. For more information, please call +1 888 546
3243.
GE's Critical Power business powers rapidly changing, disruptive markets where
massive data, communications and computing capacity is redefining how business
is done. Customers in data center, super computing, telecommunications and
content industries rely on GE to provide the reliable and energy-efficient power
to keep networks flowing and transactions moving 24/7. To learn more about GE's
Critical Power business, visit http://www.gecriticalpower.com
About GE
GE (NYSE: GE) imagines things others don't, builds things others can't and
delivers outcomes that make the world work better. GE brings together the
physical and digital worlds in ways no other company can. In its labs and
factories and on the ground with customers, GE is inventing the next industrial
era to move, power, build and cure the world. http://www.ge.com
Follow GE Industrial Solutions and its Critical Power business on Twitter
@GEindustrial and @GEcriticalpower.
For more information, contact:
Ellen Zeidler
GE
Critical Power
+1 972 244 9497
ellen.zeidler@ge.com
Matt Falso or Howard Masto
Masto Public Relations
+1 518 786 6488
matt.falso@mastopr.com
howard.masto@ge.com
(Ende)
Aussender: Shepard Fox Communications GmbH
Ansprechpartner: Jutta Antretter
Tel.: +49 89 3803 7000
E-Mail: jutta.antretter@shepard-fox.com
Website: www.shepard-fox.com
Quelle: http://www.pressetext.com/news/20150218018
© pressetext Nachrichtenagentur GmbH http://www.pressetext.com - Die
inhaltliche Verantwortung für redaktionelle Meldungen (pte) liegt bei
pressetext, für Pressemitteilungen (pts) beim jeweiligen Aussender. Weitere
Informationen erhalten Sie bei unserem Redaktionsservice unter
info@pressetext.com oder Tel. +43-1-81140-300. (END) Dow Jones NewswiresFebruary 18, 2015 05:45 ET (10:45 GMT)
Input Voltage Range of 18-75 Volts
* Space-Efficient, Quarter-Brick Footprint Enables Efficiencies up to 93 Percent
GE's Critical Power business (NYSE: GE) has expanded its Hammerhead series of
DC-DC modules with its new 228-watt (W) quarter-brick QHHD019A0B isolated DC-DC
converters. The low-height modules provide a single, precisely regulated output
voltage over an ultra-wide input voltage range of 18-75 volts DC. The new DC-DC
converters exhibit GE's vast heritage of reliability and quality while
integrating the latest in technology, component and process standardization.
These cost-effective and energy- and space-efficient DC-DC converters enable
input power flexibility for board designers while providing a common building
block that can support multiple sockets. In terms of output voltage, GE's new
Hammerhead converters provide a nominal 12-volt output voltage that is rated for
19 amps output current. The new modules achieve typical full-load efficiencies
of greater than 93 percent at input voltages of 24 volts and 48 volts.
Standard features of GE's QHHD019A0B DC-DC converters include remote on/off,
remote sense, output-voltage adjustment and over-voltage, over-current and
over-temperature protection. In addition, an optional heat plate is available,
which allows for an external, standard, quarter-brick heat sink
attachment-enabling designers to achieve higher output currents in
high-temperature applications.
With the addition of the new 228-W QHHD DC-DC converters to its extensive family
of Hammerhead products-which include EHHD, KHHD and SHHD modules-GE is able to
provide board designers with a wide range of offerings-from 15-W in a
1-by-1-inch module to 228-W in a DOSA-standard, quarter brick unit. This
versatility allows GE to provide board designers with the technology they need
to meet their unique design challenges.
Key Features and Benefits of the GE's QHHD019A0B Isolated DC-DC Converters:
* Ultra-wide input voltage range of 18-75 volts.
* High power density at 228-W.
* Nominal output voltage of 12 volts at 19-amp output currents.
* Robust 2,250-volt isolation.
* Typical full-load efficiencies of greater than 93 percent at input voltages of
24 volts and 48 volts.
GE's QHHD019A0B DC-DC converters can be used as a traditional DC-DC module,
powering devices such as hard drives, fans and other applications requiring 12
volts of power. The modules also feature 2,250-volt isolation, making them ideal
for use in power over Ethernet (PoE) applications. Other key applications for
GE's new Hammerhead-series DC-DC converters include hybrid power architectures,
wireless networks, enterprise networks (including PoE) and industrial equipment.
GE will be showcasing its new QHHD019A0B DC-DC converters at embedded world 2015
(booth # 5-120), which is taking place Feb. 24-26 in Nuremberg, Germany.
Availability and Pricing:
GE's QHHD019A0B isolated DC-DC converters are now available in volume
quantities. Pricing begins at $31.10 per module at original equipment
manufacturer production volumes. For more information, please call +1 888 546
3243.
GE's Critical Power business powers rapidly changing, disruptive markets where
massive data, communications and computing capacity is redefining how business
is done. Customers in data center, super computing, telecommunications and
content industries rely on GE to provide the reliable and energy-efficient power
to keep networks flowing and transactions moving 24/7. To learn more about GE's
Critical Power business, visit http://www.gecriticalpower.com
About GE
GE (NYSE: GE) imagines things others don't, builds things others can't and
delivers outcomes that make the world work better. GE brings together the
physical and digital worlds in ways no other company can. In its labs and
factories and on the ground with customers, GE is inventing the next industrial
era to move, power, build and cure the world. http://www.ge.com
Follow GE Industrial Solutions and its Critical Power business on Twitter
@GEindustrial and @GEcriticalpower.
For more information, contact:
Ellen Zeidler
GE
Critical Power
+1 972 244 9497
ellen.zeidler@ge.com
Matt Falso or Howard Masto
Masto Public Relations
+1 518 786 6488
matt.falso@mastopr.com
howard.masto@ge.com
(Ende)
Aussender: Shepard Fox Communications GmbH
Ansprechpartner: Jutta Antretter
Tel.: +49 89 3803 7000
E-Mail: jutta.antretter@shepard-fox.com
Website: www.shepard-fox.com
Quelle: http://www.pressetext.com/news/20150218018
© pressetext Nachrichtenagentur GmbH http://www.pressetext.com - Die
inhaltliche Verantwortung für redaktionelle Meldungen (pte) liegt bei
pressetext, für Pressemitteilungen (pts) beim jeweiligen Aussender. Weitere
Informationen erhalten Sie bei unserem Redaktionsservice unter
info@pressetext.com oder Tel. +43-1-81140-300. (END) Dow Jones NewswiresFebruary 18, 2015 05:45 ET (10:45 GMT)