Roskill: Zircon Markets Signal Steady Recovery by End of 2014

LONDON, September 25, 2014 /PRNewswire/ --

Zircon consumption is at its lowest point for a decade, having dropped by over 30% to 1Mt since its 2011 peak, but there are signs that demand in 2014 is set to stabilise. The use of zircon in some key markets, including traditional ceramics and foundries, has for several years been affected by substitution from competing minerals or its outright elimination from product formulations.

This fall in consumption occurred in spite of continued growth in the traditional ceramics market, the largest application for zircon, as consumers sought to reduce their reliance on the opacifier mineral owing to high raw material costs.

Zircon prices were volatile between 2010 and 2012, more than doubling in the space of 18 months to reach $2,500/t in mid-2012. This was the result of supply shortages, as end markets recovered from the financial downturn more rapidly than anticipated. In many cases, zircon consumers were unable to pass on increased costs, particularly in the traditional ceramics market.

Substitution trends stabilise

Lower consumption of zircon has been achieved by manufacturers through substitution, changing fashions and manufacturing innovations. In ceramics, zircon substitution has been particularly pronounced in the traditional Western European hubs of Spain and Italy. Ceramic producers have achieved similar quality levels by partially or completely substituting zircon with aluminosilicate minerals such as calcined alumina and feldspar in some applications.

While some substitution has also been seen in Asian ceramics, mainly those produced for the export market, producers in the much larger domestic markets in the region have sacrificed quality in favour of lower production costs. In many cases consumers have entirely removed zircon from their formulations.

As a result of lower zircon demand, supply significantly exceeded consumption which led to the creation of large stockpiles. During this period, prices stabilised and then fell sharply. Australian zircon export prices fell to an average of $1,650/t in late 2012, and continued to fall throughout 2013 and into 2014. By mid-2014, they had reached an average of $1,000/t.

Zircon use in chemicals and refractories also showed a decline between 2011 and 2013, but this was linked to lower output of these end-products rather than raw material substitution.

Downstream zirconium product demand picks up

Zircon is used as the feedstock material in numerous downstream zirconium products, principally in the form of chemicals, zirconium oxide (zirconia) and metal. Zirconium products are used in myriad end markets, but typically in low-volume and high-value goods.

World production of zirconium chemicals is dominated by China, where over 88% of capacity is located. Chinese companies have invested substantially in chemical facilities over the last decade, particularly for zirconium oxychloride which is the feedstock material for downstream zirconium chemicals.

Global zirconium chemical capacity is estimated to be 523,000tpy in 2014, with zirconium oxychloride (ZOC) comprising 80% of this. The Chinese ZOC market is currently in a state of acute overcapacity with few profits available to suppliers.

The largest market for zirconium oxychloride is now in the production of high-purity chemical zirconia, which itself is being influenced by the ceramic pigments market. The introduction of digital inkjet printing has revolutionised the decoration of ceramic tiles and has spurred demand for zirconia-based pigments.

Ceramic pigments are also a major consumer of fused zirconia, although the dominant application for this material continues to be in refractory materials particularly for crude steel and glass manufacture.

Advanced ceramics & environmental growth

In the last three years the chemical zirconia market has seen healthy growth in the very high-value sectors of advanced ceramics and environmental markets, particularly bioceramic uses and oxygen sensors.

Environmental markets have also spurred demand for zirconium basic carbonate and its derivative products, namely in the catalyst sector. Automotive catalyst demand is being driven by environmental concerns over the release of pollutants from automotive exhaust gases, which is prevented with the use of a catalytic converter. Over 95% of all new vehicles sold globally each year are now fitted with catalytic converters.

The main influence on the zirconium metal market is the nuclear industry, accounting for around 60% of zirconium sponge capacity, where zirconium alloys are used in the manufacture of fuel tubes, cladding and other components. World demand and investments in nuclear power are recovering from the March 2011 Fukushima accident in Japan and its subsequent impact on global confidence in nuclear power safety.

Price traction expected from 2016

World zircon demand is forecast to grow by 3.7%py between 2014 and 2019. The chemicals sector is expected to see the highest growth rate at 4.1%py, but will be closely followed by ceramics. Lower growth rates are projected for demand into the foundries and refractories sectors.

Zircon prices are anticipated to be buoyed by higher demand and are forecast to stabilise in the latter part of 2014. While prices are expected to firm slightly in 2015, sizeable stockpiles currently overhang the market. These are likely to be drawn down until late 2015, after which higher sales and demand could encourage stronger prices.

Zirconium Concentrate: Global Industry Markets and Outlook report, profiles over 150 current and potential producers and processors of zircon sand and zirconium silicate. TheZirconium Oxide, Chemicals and Metal: Global Industry Markets and Outlookreport provides an in-depth look at the downstream zirconium supply chain and markets. It profiles more than 150 current and potential producers of zirconia, zirconium chemicals, and zirconium metals and alloys. These reports build on Roskill's 13 prior editions of the Zirconium report, focusing in even greater depth on international trade flows, demand, end-use applications and prices; providing a comprehensive review of the upstream and downstream zirconium market and its prospects. These latest editions are available to order by Telephone : [phone], Fax [phone] Email:[e-mail] Web:http://www.roskill.com/zirconium.

Note to editors

Roskill Information Services Ltd. of London, UK is a leading provider of multi-client and bespoke market research services to the minerals and metals industry.

Roskill's new Zirconium Concentrate: Global Industry Markets and Outlook report contains 275 pages, 156 tables and 62 figures plus an appendix of international trade statistics. Its new Zirconium Oxide, Chemicals & Metal: Global Industry Markets and Outlook report contains 167 pages, 74 tables and 28 figures plus an appendix of international trade statistics.Both reports provide a detailed review of the industry, with subsections on the activities of the leading producing companies. They also analyse consumption, trade and prices.

For further information on this report, please contact Alison Saxby on [phone]([e-mail]). To be added to our press distribution list, please contact Pedro Palma ([e-mail]).